I'm not sure this is the correct forum for this sort of item, but I'll ask anyway.
Is there any sort of extension available to provide a logoff capability from the web gui? I need this capability for HIPAA compliance. If not, how would I go about offering a bounty to get one implemented? Any coding that I sponsor and gets produced from this will be given back to the project lead for incorporation into the product. If anyone has any information or is interested in implementing this, please respond, and I'll provide contact information. Thanks, Vaughn Reid III On Sun, 11 Feb 2007 21:31:22 +0000 (UTC), "Jim" <[EMAIL PROTECTED]> said: > Holger Bauer <[EMAIL PROTECTED]> writes: > > > > > Sure, go to Services>DHCP in the webgui. You'll notice a seperate tab for > > each > internal interface you have > > (like your OPT1, it's labeled with the interface name). Switch to that tab > > and > make your settings. > > DHCP-Server in pfSense is per Interface, so you can have different > DHCP-settings for each of your interfaces. > > > > Holger > > > > > -----Ursprüngliche Nachricht----- > > > Von: Nate Davis [mailto:[EMAIL PROTECTED] > > > Gesendet: Montag, 2. Januar 2006 18:39 > > > An: [EMAIL PROTECTED] > > > Betreff: [pfSense Support] DHCP Server on OPT1 > > > > > > > > > Hello Everyone, > > > > > > Could someone detail for me what I need to do to enable the > > > DHCP server > > > for OPT1 and the LAN interface? It is running great on LAN, > > > but I need a > > > DHCP server running on the OPT1 Interface. Is this even > > > possible? The > > > Subnet for OPT1 is 192.168.60.0/24 (OPT1 is 192.168.60.1). > > > > > > Thanks, > > > Nate > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > ____________ > > Virus checked by G DATA AntiVirusKit > > > > Hi All, > > I am setting up pfsense on my wrap board for the first time so maybe I > just > missed something... I am trying to get dhcp server to serve address to > wireless > clients. > > I see in this post that on the "services" page under "dhcp server" there > 'should' be another tab for the opt1 aka ath0 interface where I can > configure > the dhcp server specific for this interface... but it isn't there. > > Version of code I am running is: 1.0.1 built on Sun Oct 29 01:45:08 UTC > 2006 > > The wrap board has 2 minipci slots, 1 of which holds my atheros card, > plus it > has 2 10/100 interfaces. > > Do I need to enable some form of port forwarding? I don't think that > should be > necessary. > > I thought that by bridging the wireless and LAN interfaces, that would be > enough > but still didn't work. > > I configured the bridge on both LAN config page and opt1 config page.. > still no > luck.. > > Then... I added any any any rules to both LAN and wireless interfaces and > still > it isn't working for me... > > Any suggestings would be greatly appreaciated.! > > thank you > > Jim > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > -- Vaughn L. Reid III [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
