To access via the WAN port, simply open the port on the firewall rule for the WAN interface. Of course, if you wish to use HTTPS, you must also enable HTTPS on pfsense. What I did was: instead of using the WAN IP address to connect to the webConfigurator, I enabled PPTP on pfsense and establish a PPTP session into pfsense. After establishing the PPTP tunnel, I use the LAN IP to connect to the webConfigurator. Regards, Kelvin
-----Original Message----- From: Anil garg [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 13, 2007 5:04 AM To: [email protected] Subject: [pfSense Support] Acess pfsense from WAN Is there a way to access and configure pfsense from outside / WAN using HTTPS or something like that?
