Not with static routes but this should be doable using policybased routing using firewallrules with appropriate gateways.
Holger > -----Original Message----- > From: Brookenmire [mailto:[EMAIL PROTECTED] > Sent: Wednesday, May 30, 2007 11:04 AM > To: [email protected] > Subject: [pfSense Support] Static Route question > > Hi all, > > On PfSense 1.2b1 I have a static route on the LAN interface. > It works as it should, diverting traffic from the LAN that > has a destination within its subnet range to a router that is > on another (OPT1) interface. > The destination addresses are external IP addresses (not > within any PfSense interface subnets). > > The problem is that I need all traffic that flows from a > different interface > (OPT2) that has the same destination address to route as it > would otherwise would through the default WAN interface. > At the moment, all traffic within the subnet range from > either the LAN or > OPT2 get routed to OPT1 > > I have the static routes "Interface" setting set to LAN. > > Is it possible to get PfSense to static route traffic only > from the interface it is set to? > > Thanks. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
