I once had a samsung notebook with an intel wireless card which had similiar problems. Interestingly when using the latest samsung provided driver the issues still were there. After using the reference driver from the intel site (which was several versions newer) these problems disappeared. Try upgrading your driver on the client for the intelcard using the original intel drivers from http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=1637&lang= eng
Holger -----Original Message----- From: Timothy J. Deerinck [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 06, 2007 8:29 PM To: [email protected] Subject: RE: [pfSense Support] Stange Problem with WRAP / Wireless Actually, the wireless is bridged to the lan, and the lan never (hopefully) goes down. Here is my connection info: INTERNET ---> PFSENSE WRAP WAN ---> BRIDGED WLAN / LAN ---> UNTANGLED SERVER IN BRIDGE MODE ---> NETWORK SWITCH --> SERVERS AND WORKSTATIONS This problem was happening before the Untangled Server was installed, so I don't believe this is the problem. Thanks, ~Tim -----Original Message----- From: Holger Bauer [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 06, 2007 11:23 AM To: [email protected] Subject: RE: [pfSense Support] Stange Problem with WRAP / Wireless Is your wireless card bridged to the lan interface and your lan interface is not always up? unfortunately a bridge will only work if all interfaces in the bridgegroup are up, which mean if your lan is unplugged your wireless interface won't work. Holger ________________________________ From: Timothy J. Deerinck [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 06, 2007 6:32 PM To: [email protected] Subject: [pfSense Support] Stange Problem with WRAP / Wireless I am having a strange problem with my installation of pfSense on a WRAP system. The hardware has two LAN interfaces, and one Atheros Wireless card. I also have a client laptop which has an Intel Pro 2200BG Wireless card running under Windows XP. When the laptop is powered up, it immediately connects to the pfSense AP, but the DHCP process does not complete. DHCP is being performed by a Server on the protected network. The strange thing is that if I reboot the pfSense box, the laptop will then grab an IP from DHCP. This reboot only lasts for a short while, and then the cycle will repeat. I also just noticed that if the Laptop is connected to the AP and does not get an IP address, and I then plug a hardwire Ethernet cable into the LAN on the laptop, both the LAN and the Wireless interfaces will get IP addresses!! I am at a total loss as to what would be causing this. Any help or direction at this point would be immensely appreciated! Thank you, ~Tim No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.23/1113 - Release Date: 11/6/2007 10:04 AM This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from us may be monitored. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this message, or any attachment, that have arisen as a result of e-mail transmission. If verification is required, please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.23/1113 - Release Date: 11/6/2007 10:04 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.15.23/1113 - Release Date: 11/6/2007 10:04 AM This message (and any associated files) is intended only for the use of the individual or entity to which it is addressed and may contain information that is confidential, subject to copyright or constitutes a trade secret. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from us may be monitored. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. Therefore, we do not accept responsibility for any errors or omissions that are present in this message, or any attachment, that have arisen as a result of e-mail transmission. If verification is required, please request a hard-copy version. Any views or opinions presented are solely those of the author and do not necessarily represent those of the company. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
