Does this mean Serial to usb as in Vodaphone pcmcia crds? On Dec 13, 2007 8:43 PM, Chris Kuhn <[EMAIL PROTECTED]> wrote:
> Is there a driver in 1.2-RC3-embedded for USB-Serial > converters? or a way to add it in? > -- this is on an ALIX.2C3 board built with > pfSense-1.2-RC3-Embedded.img -- so far everything else > is working great! > > The converter does show up in the system.log as a > generic device, but I can't seem to talk to it: > Dec 12 23:33:23 hostname kernel: ugen0: FIDI > USBSERIALCONVERTER, rev 1.10/4.00, addr 2 > > I believe this is working in FreeBSD. (and likely in a > full install of pfSense?) Is this something that was > left out of the embedded version? Will I need to > build a new image? I do know this very converter works > well under both linux and OS X. - in fact I used it > under OS X to bring up the ALIX board serial console > in terminal.app - using screen - it worked very well. > > I'm a newbie to BSD - just setup this pfSense FW as > well as a 'normal' FreeBSD box as well to do some > poking around and learning. > > from OS X, the details of the converter are: > Version: 4.00 > Bus Power (mA): 500 > Speed: Up to 12 Mb/sec > Manufacturer: FIDI > Product ID: 0x6001 > Serial Number: FTCDLDDH > Vendor ID: 0x0403 > > Thanks for any and all help, pointers, or even RTFM > pointers if I missed it ;-) > -CK > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
