yes the Vista machines sees all the devices on the network
net config on vista is the same i disabled ipv6
pfsense rules are wide open between the source and destination
ms netmon 3.1 prints
4866 137.566868 {TCP:75, IPv4:74} x.x.x.x
x.x.x.x TCP TCP: Flags=.S......, SrcPort=53637,
DstPort=9000, Len=0, Seq=3230012014, Ack=0, Win=8192 (scale factor 0) = 8192
4918 140.559039 {TCP:75, IPv4:74} x.x.x.x
x.x.x.x TCP TCP: Flags=.S......, SrcPort=53637,
DstPort=9000, Len=0, Seq=3230012014, Ack=0, Win=8192 (scale factor 0) = 8192
4986 146.559382 {TCP:75, IPv4:74} x.x.x.x
x.x.x.x TCP TCP: Flags=.S......, SrcPort=53637,
DstPort=9000, Len=0, Seq=3230012014, Ack=0, Win=8192 (scale factor 0) = 8192
4993 153.039753 {TCP:75, IPv4:74} x.x.x.x
x.x.x.x TCP TCP: Flags=F...A..., SrcPort=9000,
DstPort=53637, Len=0, Seq=4073603, Ack=3230012015, Win=4096 (scale
factor not found)
tcpdump for windows prints
15:58:19.409978 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
15:58:20.423046 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
15:58:21.437099 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
15:58:22.452214 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
15:58:23.466206 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
15:58:24.480281 IP LOCAL32.9001 > 255.255.255.255.9000: UDP, length 6
with pfsense disabled it is working with VISTA
Luigi
At 03:31 PM 18/01/2008, you wrote:
Is the Vista machine able to see other devices on the network (ie:
inside your LAN)? Is the networking configuration information for
the Vista machine identical to the XP Pro machine? What shows up in
the pfSense firewall logs? Have you used tcpdump to capture the
packet traffic and ensure its actually hitting the
interfaces? Whatever problem you are having, its either specific to
the Vista machine, or your firewall rules.
-Gary
Vino wrote:
Hi,
I have a problem with windows VISTA connecting to an Aten KVM
switch cn6000. behind PFsense 1.2rc4 with client tool or web based
i am running pfsense in filtered bridge mode
with Vista (vista firewall disabled or enabled) and PFsense set
with all ports open , source and destination set properly and
using all or any protocol setting, there is no connection whatsoever.
with windows XP pro from within the same network it works well
of course disabling PFsense altogether makes it work.
any suggestions?
regards,
Luigi
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
