remember that Vista tries to use IPv6 as the default protocol instead of
IPv4. double check your network connection settings that they are properly
configured under vista as it is a little bit more finicky.
-Sean
--------------------------------------------------
From: "Gary Buckmaster" <[EMAIL PROTECTED]>
Sent: Friday, January 18, 2008 9:31 AM
To: <[email protected]>
Subject: Re: [pfSense Support] vista_problem
Is the Vista machine able to see other devices on the network (ie: inside
your LAN)? Is the networking configuration information for the Vista
machine identical to the XP Pro machine? What shows up in the pfSense
firewall logs? Have you used tcpdump to capture the packet traffic and
ensure its actually hitting the interfaces? Whatever problem you are
having, its either specific to the Vista machine, or your firewall rules.
-Gary
Vino wrote:
Hi,
I have a problem with windows VISTA connecting to an Aten KVM switch
cn6000. behind PFsense 1.2rc4 with client tool or web based
i am running pfsense in filtered bridge mode
with Vista (vista firewall disabled or enabled) and PFsense set with
all ports open , source and destination set properly and using all or
any protocol setting, there is no connection whatsoever.
with windows XP pro from within the same network it works well
of course disabling PFsense altogether makes it work.
any suggestions?
regards,
Luigi
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
