Yes if you look here http://m0n0.ch/wall/beta.php Under 1.3b4 (08/25/2007)
modified WRAP image kernel to also work with ALIX.2 (added vr device and USB EHCI + CPU soft reset patches to wrap kernel; tested on prototype board) for ALIX, interfaces need to be re-assigned (vr* instead of sis*) There is a way to edit the config and make your own image to and have all the ports assigned correctly, http://forum.pfsense.org/index.php/topic,1998.0.html I just have had no time to try it myself, it dosen't really apply to me any more since I am moving from compactflash to microdrive and going to attempt a full install on my alix board. On Jan 26, 2008 3:25 PM, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Ah ha! > > I knew it was not working. > > I will see if I can adjust the configuration for the vr0 interface. > > Also, I would love to see an example of a file like this... > > -Galen > > > On Jan 26, 2008, at 12:56 PM, Fernando Sanchez wrote: > > > You do have to use the serial port to assign interfaces on ALIX > > boards, since they were changed to vr0, I wish they would apply the > > m0n0wall patch which fixes because I don't have any motherboards with > > serial ports. > > > > On Jan 26, 2008 12:53 PM, Vivek Khera <[EMAIL PROTECTED]> wrote: > >> > >> On Jan 26, 2008, at 10:32 AM, [EMAIL PROTECTED] wrote: > >> > >>> I am having trouble with this point and would appreciate a example > >>> configurational file that will allow at least one of the ethernet > >>> ports to grab an IP via DHCP, or just have a static IP... > >>> something... anything. The basic problem is that I don't have a > >>> serial cable anywhere! (I thought I was done with such old > >>> technologies!) > >> > >> by default, the LAN answers as 192.168.1.1 so just take a laptop or > >> other computer, right it to IP 192.168.1.2, and then configure your > >> box as you see fit. or you can ssh into it and set the IP that way > >> if > >> you prefer. > >> > >> you don't *have* to have the serial port to do the initial config. > >> > >> > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > >> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
