if the m0n0 is known to work then you could install the m0n0 image and then use the gui to change the firmware to pfSense.
sai On 1/28/08, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > I've modified the configuration file to point to vr0/vr1/vr2 as > appropriate, however there is no active IP where I expect it, on any > of the ports. > > If anybody could confirm the interface names or provide a working > sample of config.xml, it would be much appreciated. > > -Galen > > On Jan 26, 2008, at 3:25 PM, [EMAIL PROTECTED] wrote: > > > Ah ha! > > > > I knew it was not working. > > > > I will see if I can adjust the configuration for the vr0 interface. > > > > Also, I would love to see an example of a file like this... > > > > -Galen > > > > On Jan 26, 2008, at 12:56 PM, Fernando Sanchez wrote: > > > >> You do have to use the serial port to assign interfaces on ALIX > >> boards, since they were changed to vr0, I wish they would apply the > >> m0n0wall patch which fixes because I don't have any motherboards with > >> serial ports. > >> > >> On Jan 26, 2008 12:53 PM, Vivek Khera <[EMAIL PROTECTED]> wrote: > >>> > >>> On Jan 26, 2008, at 10:32 AM, [EMAIL PROTECTED] wrote: > >>> > >>>> I am having trouble with this point and would appreciate a example > >>>> configurational file that will allow at least one of the ethernet > >>>> ports to grab an IP via DHCP, or just have a static IP... > >>>> something... anything. The basic problem is that I don't have a > >>>> serial cable anywhere! (I thought I was done with such old > >>>> technologies!) > >>> > >>> by default, the LAN answers as 192.168.1.1 so just take a laptop or > >>> other computer, right it to IP 192.168.1.2, and then configure your > >>> box as you see fit. or you can ssh into it and set the IP that > >>> way if > >>> you prefer. > >>> > >>> you don't *have* to have the serial port to do the initial config. > >>> > >>> > >>> > >>> --------------------------------------------------------------------- > >>> To unsubscribe, e-mail: [EMAIL PROTECTED] > >>> For additional commands, e-mail: [EMAIL PROTECTED] > >>> > >>> > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: [EMAIL PROTECTED] > >> For additional commands, e-mail: [EMAIL PROTECTED] > >> > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
