[pfSense Support] Routable IP on DMZ

[joseph blase]

Hi,

 I had this particular network setup:



                            WAN [ 213.13.76.x/29]
                                      '
                                      '
                                      '
                                      '
                           [ PFSENSE]---------------------->DMZ[
207.230.228.X/24]
                                     '
                                     '
                                     '
                                     '
                                     '
                                 LAN [ 192.168.1.x/24]

1) gateway on host under DMZ are set to 207.230.228.1 (IP addr of pfsense
OPT1 NIC)
2) gateway on host under LAN are set to 192.168.1.1(IP addr of pfsense LAN
NIC)

Now all traffic I allowed from LAN to DMZ are working and vice-versa as well
as {LAN,DMZ} going out thru WAN int. The issue now is user from
outside(internet users) are not able to access the services/ports that I
serve on my DMZ server, I created a firewall rule on WAN to allow traffic
from any to DMZ Subnet to specific ports to no avail. Anything that needs to
be done? Did I missed out some routing/natting that needs to be created?
This is my first attempt try pfsense and English is not my native tongue so
kindly point out if there's unclear of my problem statement.


Thanks and regards,
  --joseph