Randy Schultz wrote:
Hey there,
This is just a report of a minor problem I've noticed. It's easy to work
around so this is more of a FWIW.
I am currently toying with 1.2-RELEASE built on Sun Feb 24 17:04:58
EST 2008.
We have a bit of a non-standard setup here where the default route on the
particular net our lab is on is .4. On install I noticed there was no
default
route set. I have to drop to command line and set a default route
whenever I
install. W/o this I of course cannot access the web page. I also
have to set
the default route on any reboot. If I hard-code the default route for
the
interface in the config.xml, the default route will survive a reboot.
The system's default route is the gateway of the WAN interface. You have
to configure the WAN as the interface facing the default gateway.
Numerous things done in the GUI cause routing to be re-configured in the
back end, but under no circumstances should that ever drop your WAN's
gateway, nor have I heard of that happening. It sounds like you're
trying to use a default gateway on an interface other than WAN?
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
