I did state Squid was in there ;) ... "I have squid setup with defaults (non transparent) on LAN ONLY I have lightsquid installed for reporting"
So, anything else to try? I'm willing to help the cause if you have any ideas... -Timm -----Original Message----- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Sunday, April 27, 2008 1:47 PM To: [email protected] Subject: Re: [pfSense Support] CP Issue On Sat, Apr 26, 2008 at 3:51 AM, Tim Dickson <[EMAIL PROTECTED]> wrote: > Setting up the Rule to put traffic to the interface address out the default > gateway did not work > > Setting the gateway to JUST the second WAN (non-loadbalance) failed > > Setting the gateway to DEFAULT worked... (With Squid running) [snip] Squid is not compatible with CP. This would have been helpful if you told this up front :) Scott --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
