Couple other suggestions:
-Disable ACPI
-make sure the BIOS is up to date.
and other items here may help if all else fails.
http://devwiki.pfsense.org/BootTroubleShooting
Atkins, Dwane P wrote:
Thank you, Chris. I could get to the point where it brought the reboot
screen. I chose to reboot into safemode where we saw an issue with IRQ
6 which is the embedded SATA IRQ. However, it did allow to start the
install process of pfSense. I will try this tomorrow.
Thank you for all your help.
Dwane
-----Original Message-----
From: Chris Buechler [mailto:[EMAIL PROTECTED]
Sent: Wednesday, May 07, 2008 4:58 PM
To: [email protected]
Subject: Re: [pfSense Support] Unable to install pfSense 1.2 LiveCD
Atkins, Dwane P wrote:
I am attempting to install pfSense on a Dell PowerEdge RS200 server.
This has a 64 bit ES4500 2.2 Ghz Processor with 1 GB memory and 80 gig
SATA hard drive.
The install goes so far and then I start getting ad4: and acd0 errors
(errors that occur on ad4 seem to occur on acd0
acd0: SET FEATURE ENABLE RCACHE: task timeout completing request
directly
acd0: SET FEATURE ENABLE WCACHE task timeout completing request
directly
SATA support in FreeBSD 6.2 doesn't always work well, 6.3 has proven to
work much better with any box with SATA devices. I suggest trying this
iso:
http://cvs.pfsense.org/~sullrich/testing_images/6/FreeBSD_RELENG_6_3/pfS
ense_RELENG_1_2/
Which is pfSense 1.2 with a FreeBSD 6.3 base. There are about a dozen
people running it in production, it works fine. It's similar to what
1.2.1 will be.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
