I will try that as well. Thanks all
Dwane -----Original Message----- From: Chris Buechler [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 07, 2008 5:07 PM To: [email protected] Subject: Re: [pfSense Support] Unable to install pfSense 1.2 LiveCD Couple other suggestions: -Disable ACPI -make sure the BIOS is up to date. and other items here may help if all else fails. http://devwiki.pfsense.org/BootTroubleShooting Atkins, Dwane P wrote: > Thank you, Chris. I could get to the point where it brought the reboot > screen. I chose to reboot into safemode where we saw an issue with IRQ > 6 which is the embedded SATA IRQ. However, it did allow to start the > install process of pfSense. I will try this tomorrow. > > Thank you for all your help. > > Dwane > > -----Original Message----- > From: Chris Buechler [mailto:[EMAIL PROTECTED] > Sent: Wednesday, May 07, 2008 4:58 PM > To: [email protected] > Subject: Re: [pfSense Support] Unable to install pfSense 1.2 LiveCD > > Atkins, Dwane P wrote: > >> I am attempting to install pfSense on a Dell PowerEdge RS200 server. >> >> >> >> This has a 64 bit ES4500 2.2 Ghz Processor with 1 GB memory and 80 gig >> > > >> SATA hard drive. >> >> >> >> The install goes so far and then I start getting ad4: and acd0 errors >> (errors that occur on ad4 seem to occur on acd0 >> >> >> >> acd0: SET FEATURE ENABLE RCACHE: task timeout completing request >> directly >> >> acd0: SET FEATURE ENABLE WCACHE task timeout completing request >> > directly > > > > SATA support in FreeBSD 6.2 doesn't always work well, 6.3 has proven to > work much better with any box with SATA devices. I suggest trying this > iso: > http://cvs.pfsense.org/~sullrich/testing_images/6/FreeBSD_RELENG_6_3/pfS > ense_RELENG_1_2/ > > Which is pfSense 1.2 with a FreeBSD 6.3 base. There are about a dozen > people running it in production, it works fine. It's similar to what > 1.2.1 will be. > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
