This newbie wants to setup a pfsense box with dual wan connections and 2
vlans to separate 2 networks. I created the virual ips as CARP with the
VHID set to the vlan # I need and then added an interface on that Vlan.
This connects to a Dell PowerConnect 3024 switch. When a test computer
hooks into the switch port that I designate for vlan2 it receives an ip
thats just of the regular lan dhcp and not the vlan network. In the
switch I have tried to have both the uplink port as tagged and untagged
but no go. I set the port to be on vlan2 and untagged same nothing. I
tag the uplink port and then can't get an ip or ping the pfsense box
until I untag it. If someone could point me in the right direction with
this I would be most thankful. We are a computer shop and I want to
separate the office network from the clients computers and when our
phone system gets upgraded later this year to an asterisk based system
it will have qos ready to setup. Even with a static ip set on the
computer unable to ping.
Wan1 - DSL | Wan2- Cable Modem
LAN1-pfsense 192.168.5.x
vlan2- 192.168.10.x
vlan 3- 192.168.20.x
Thank you in advance
Paul
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
