Not sure if anyone had looked at the config file but since i have not heard
back I decided to start over. Did a clean install of pfsense. Not sure if I
have the dell powerconnect switch configured correctly but get different
stories. There is only 1 switch and some say I need a trunk port some say
no.
Heres the Layout for now that I want to get working
[Pfsense]
_______|________________
| |rl0 (wan2 later) |
{WAN-xl0-Dhcp} {Network} LAN ( vlan1
on rl1), Opt1(vlan2 on rl1)
|
|
Dell
PowerConnect 3024
|\
Port25 (Links
to pfsense box) Port24- test port1( vlan1 - port25 tagged, port24
untagged) / Port1 test port 2 (vlan2 port25 tagged, port1 untagged)
In the pfsense box set LAN to vlan1 on rl0, Switch set port25 tagged and
port 24 untagged and unable to get traffic across. Before I was able to set
LAN to vlan1 and move traffic across port 24 but then when added the 2nd
vlan and setup vlan2 as tagged on port25 untagged port1, Port1 would not get
a dhcp address, Set manually still no traffic. I'm almost at the point in
thinking something is wrong with the switch passing vlan traffic. I did
update the firmware to the newest version.
Never have worked with vlan's before and I am trying to learn this so I
could implement it at work by the time our phone system gets put in place
which will be based on asterisk and therefore want to separate the clients
computers that are viruses infected from our network that also has a server
on it. Currently running on 2 differenent routers to separate the 2. Thank
you in advance.
On Wed, May 28, 2008 at 2:28 PM, Mousemen <[EMAIL PROTECTED]> wrote:
> config-pfSense.local-20080528142627.xml<?ui=2&ik=72a65a1505&attid=0.1&disp=emb&view=att&th=11a3100cb4bc3c07>
>
> Reset pw to the factory default
>
> I took out the WAN2 ip as that is a static ip. The WAN is set to dhcp for
> now. Let me know if I need to do anything anything else. The lan ip I'm not
> worried about as it is a test network for now and will change once in
> production
>
> Wed, 28 May 2008 09:14:30 -0500 (Central Daylight Time), Curtis LaMasters <
> [EMAIL PROTECTED]>:
>
> Please send your config.xml with passwords and IPs changed.
>
> --
> Curtis LaMasters
> http://www.curtis-lamasters.com
> http://www.builtnetworks.com
>
>
