Hi, David ! I have client and servermode working with pfsense on one system and it works like a charm... My server is running on UDP/1194 and the clients (2 of hem) are running on UDP/dynamic port...
no problem with it at all... Please recheck your config and make sure the OpenVPN services are not using the same ports. Further check <firewall-ip>/status.php if there really is only one tun-interface... should be one for each service... which version are you running ? you should at least update to 1.2-RELEASE built on Sun Feb 24 17:13:15 EST 2008 ... good luck, Martin ________________________________ Von: David Meireles [EMAIL PROTECTED] Gesendet: Mittwoch, 30. Juli 2008 12:23 An: [email protected] Betreff: Re: [pfSense Support] OpenVPN Server & Client Yes, but I want to use a pfsense box to act both as OpenVPN Server and OpenVPN Client. For example, the box is now acting as a server, althrough I have the client connection to site X configurated, but not enabled... If I enable this connection, I immediately loose the Server, because both are using the same interface (tun0). Isn't there a way to use, maybye, tun0 for server ans tun1 for client!? Paul Mansfield escreveu: > David Meireles wrote: >> noticed I couldn't use the same box for this, because there was only >> ONE tun device, and it would be used for whatever service (the openvpn > > > you can have as many openvpn servers running as you like, just give > each one its own port. they can each have entirely different > configurations, some using shared key. some on x509 cert authentication. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
