Even more info:
# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:32:58 EST 2008
[EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense.6
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (2128.01-MHz
686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3756957696 (3582 MB)
avail memory = 3677630464 (3507 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 0.0 on pci2
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x4000-0x401f mem 0xe8020000-0xe803ffff,0xe8000000-0xe801ffff irq 11 at
device 0.0 on pci3
em0: Memory Access and/or Bus Master bits were not set!
em0: Ethernet address: 00:15:17:58:01:7c
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x4020-0x403f mem 0xe8060000-0xe807ffff,0xe8040000-0xe805ffff irq 11 at
device 0.1 on pci3
em1: Memory Access and/or Bus Master bits were not set!
em1: Ethernet address: 00:15:17:58:01:7d
pcib4: <PCI-PCI bridge> at device 1.0 on pci2
pci4: <PCI bus> on pcib4
em2: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x5000-0x501f mem 0xe8120000-0xe813ffff,0xe8100000-0xe811ffff irq 11 at
device 0.0 on pci4
em2: Memory Access and/or Bus Master bits were not set!
em2: Ethernet address: 00:15:17:58:01:7e
em3: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x5020-0x503f mem 0xe8160000-0xe817ffff,0xe8140000-0xe815ffff irq 5 at
device 0.1 on pci4
em3: Memory Access and/or Bus Master bits were not set!
em3: Ethernet address: 00:15:17:58:01:7f
pcib5: <PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci9: <PCI bus> on pcib5
pcib6: <PCI-PCI bridge> at device 0.0 on pci9
pci10: <PCI bus> on pcib6
pci9: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib7: <PCI-PCI bridge> irq 11 at device 28.4 on pci0
pci13: <PCI bus> on pcib7
em4: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x6000-0x601f mem 0xe8200000-0xe821ffff irq 11 at device 0.0 on pci13
em4: Ethernet address: 00:30:48:99:1d:3a
pcib8: <PCI-PCI bridge> irq 11 at device 28.5 on pci0
pci14: <PCI bus> on pcib8
em5: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x7000-0x701f mem 0xe8400000-0xe841ffff irq 11 at device 0.0 on pci14
em5: Ethernet address: 00:30:48:99:1d:3b
uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 10 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 11 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 5 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 11 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xe8800000-0xe88003ff irq 10 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib9: <PCI-PCI bridge> at device 30.0 on pci0
pci15: <PCI bus> on pcib9
pci15: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: [FAST]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
speaker0: <PC speaker> at port 0x61 on isa0
unknown: <INT0800> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
uhid0: SMC SuperMicro LCD Display, rev 1.10/1.00, addr 2, iclass 3/0
Timecounter "TSC" frequency 2128013368 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
ad0: 152627MB <Seagate ST3160215AS 3.AAD> at ata0-master SATA150
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
em2: link state changed to DOWN
vlan0: link state changed to DOWN
em0: link state changed to DOWN
em4: link state changed to DOWN
em1: link state changed to DOWN
em3: link state changed to DOWN
em0: link state changed to UP
em4: link state changed to UP
em1: link state changed to UP
em3: link state changed to UP
em2: link state changed to UP
vlan2: link state changed to UP
vlan1: link state changed to UP
vlan0: link state changed to UP
em2: link state changed to DOWN
vlan2: link state changed to DOWN
vlan1: link state changed to DOWN
vlan0: link state changed to DOWN
em2: link state changed to UP
vlan2: link state changed to UP
vlan1: link state changed to UP
vlan0: link state changed to UP
pflog0: promiscuous mode enabled
Michael Schuh escribió:
Hello Matias,
can you see any error messages on the Console from the box?
thia are to less informations for identifying the source(s) of this
error behavior.
regards
michael
2008/9/24 Matias Surdi
<[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>>
Hi,
I'm experiencing random crashed with 1.2, sometimes happens when
saving a rule, other times when saving advanced settings.No reply
from the pfSense box, no ping replies.nothing.Completly dead.
Any idea what could be happenning here?
Thanks a lot.
---------------------------------------------------------------------
To unsubscribe, e-mail:
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
For additional commands, e-mail:
[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
--
=== m i c h a e l - s c h u h . n e t ===
Michael Schuh
Postfach 10 21 52
66021 Saarbrücken
phone: 0681/8319664
mobil: 0177/9738644
@: m i c h a e l . s c h u h @ g m a i l . c o m
=== Ust-ID: DE251072318 ===
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
