Try a SMP kernel. On Wed, Sep 24, 2008 at 5:37 PM, Matias Surdi <[EMAIL PROTECTED]> wrote: > Even more info: > > # dmesg > > > > Copyright (c) 1992-2007 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.2-RELEASE-p11 #0: Sun Feb 24 16:32:58 EST 2008 > [EMAIL PROTECTED]:/usr/obj.pfSense/usr/src/sys/pfSense.6 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (2128.01-MHz 686-class > CPU) > Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> > AMD Features=0x20100000<NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 2 > real memory = 3756957696 (3582 MB) > avail memory = 3677630464 (3507 MB) > wlan: mac acl policy registered > kbd1 at kbdmux0 > ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > cpu0 on motherboard > pcib0: <Host to PCI bridge> pcibus 0 on motherboard > pci0: <PCI bus> on pcib0 > pcib1: <PCI-PCI bridge> irq 11 at device 1.0 on pci0 > pci1: <PCI bus> on pcib1 > pcib2: <PCI-PCI bridge> at device 0.0 on pci1 > pci2: <PCI bus> on pcib2 > pcib3: <PCI-PCI bridge> at device 0.0 on pci2 > pci3: <PCI bus> on pcib3 > em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x4000-0x401f mem 0xe8020000-0xe803ffff,0xe8000000-0xe801ffff irq 11 at > device 0.0 on pci3 > em0: Memory Access and/or Bus Master bits were not set! > em0: Ethernet address: 00:15:17:58:01:7c > em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x4020-0x403f mem 0xe8060000-0xe807ffff,0xe8040000-0xe805ffff irq 11 at > device 0.1 on pci3 > em1: Memory Access and/or Bus Master bits were not set! > em1: Ethernet address: 00:15:17:58:01:7d > pcib4: <PCI-PCI bridge> at device 1.0 on pci2 > pci4: <PCI bus> on pcib4 > em2: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x5000-0x501f mem 0xe8120000-0xe813ffff,0xe8100000-0xe811ffff irq 11 at > device 0.0 on pci4 > em2: Memory Access and/or Bus Master bits were not set! > em2: Ethernet address: 00:15:17:58:01:7e > em3: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x5020-0x503f mem 0xe8160000-0xe817ffff,0xe8140000-0xe815ffff irq 5 at > device 0.1 on pci4 > em3: Memory Access and/or Bus Master bits were not set! > em3: Ethernet address: 00:15:17:58:01:7f > pcib5: <PCI-PCI bridge> irq 11 at device 28.0 on pci0 > pci9: <PCI bus> on pcib5 > pcib6: <PCI-PCI bridge> at device 0.0 on pci9 > pci10: <PCI bus> on pcib6 > pci9: <base peripheral, interrupt controller> at device 0.1 (no driver > attached) > pcib7: <PCI-PCI bridge> irq 11 at device 28.4 on pci0 > pci13: <PCI bus> on pcib7 > em4: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x6000-0x601f mem 0xe8200000-0xe821ffff irq 11 at device 0.0 on pci13 > em4: Ethernet address: 00:30:48:99:1d:3a > pcib8: <PCI-PCI bridge> irq 11 at device 28.5 on pci0 > pci14: <PCI bus> on pcib8 > em5: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port > 0x7000-0x701f mem 0xe8400000-0xe841ffff irq 11 at device 0.0 on pci14 > em5: Ethernet address: 00:30:48:99:1d:3b > uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 10 at device > 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 11 at device > 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 5 at device > 29.2 on pci0 > uhci2: [GIANT-LOCKED] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 11 at device > 29.3 on pci0 > uhci3: [GIANT-LOCKED] > usb3: <UHCI (generic) USB controller> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe8800000-0xe88003ff > irq 10 at device 29.7 on pci0 > ehci0: [GIANT-LOCKED] > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib9: <PCI-PCI bridge> at device 30.0 on pci0 > pci15: <PCI bus> on pcib9 > pci15: <display, VGA> at device 0.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH7 SATA300 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30b0-0x30bf at device 31.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model IntelliMouse, device ID 3 > fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > isa0 > fdc0: [FAST] > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/9 bytes threshold > ppbus0: <Parallel port bus> on ppc0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > unknown: <PNP0c01> can't assign resources (memory) > unknown: <PNP0303> can't assign resources (port) > speaker0: <PC speaker> at port 0x61 on isa0 > unknown: <INT0800> can't assign resources (memory) > unknown: <PNP0c02> can't assign resources (memory) > unknown: <PNP0f13> can't assign resources (irq) > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0501> can't assign resources (port) > unknown: <PNP0401> can't assign resources (port) > unknown: <PNP0700> can't assign resources (port) > uhid0: SMC SuperMicro LCD Display, rev 1.10/1.00, addr 2, iclass 3/0 > Timecounter "TSC" frequency 2128013368 Hz quality 800 > Timecounters tick every 1.000 msec > Fast IPsec: Initialized Security Association Processing. > ad0: 152627MB <Seagate ST3160215AS 3.AAD> at ata0-master SATA150 > Trying to mount root from ufs:/dev/ad0s1a > WARNING: / was not properly dismounted > WARNING: R/W mount of / denied. Filesystem is not clean - run fsck > WARNING: R/W mount of / denied. Filesystem is not clean - run fsck > em2: link state changed to DOWN > vlan0: link state changed to DOWN > em0: link state changed to DOWN > em4: link state changed to DOWN > em1: link state changed to DOWN > em3: link state changed to DOWN > em0: link state changed to UP > em4: link state changed to UP > em1: link state changed to UP > em3: link state changed to UP > em2: link state changed to UP > vlan2: link state changed to UP > vlan1: link state changed to UP > vlan0: link state changed to UP > em2: link state changed to DOWN > vlan2: link state changed to DOWN > vlan1: link state changed to DOWN > vlan0: link state changed to DOWN > em2: link state changed to UP > vlan2: link state changed to UP > vlan1: link state changed to UP > vlan0: link state changed to UP > pflog0: promiscuous mode enabled > > > > Michael Schuh escribió: >> >> Hello Matias, >> >> can you see any error messages on the Console from the box? >> thia are to less informations for identifying the source(s) of this error >> behavior. >> >> regards >> >> michael >> >> 2008/9/24 Matias Surdi <[EMAIL PROTECTED] >> <mailto:[EMAIL PROTECTED]>> >> >> Hi, >> >> I'm experiencing random crashed with 1.2, sometimes happens when >> saving a rule, other times when saving advanced settings.No reply >> from the pfSense box, no ping replies.nothing.Completly dead. >> >> Any idea what could be happenning here? >> >> Thanks a lot. >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: >> [EMAIL PROTECTED] >> <mailto:[EMAIL PROTECTED]> >> For additional commands, e-mail: >> [EMAIL PROTECTED] >> <mailto:[EMAIL PROTECTED]> >> >> >> >> >> -- >> === m i c h a e l - s c h u h . n e t === >> Michael Schuh >> Postfach 10 21 52 >> 66021 Saarbrücken >> phone: 0681/8319664 >> mobil: 0177/9738644 >> @: m i c h a e l . s c h u h @ g m a i l . c o m >> >> === Ust-ID: DE251072318 === > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > >
-- Ermal --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
