Chris, Does it matter which IP address on my LAN it is? Should it be the LAN IP of the PFSense box, or something other than that?
[Christopher Iarocci] Does the radius server see requests coming from the IP address specified there or the LAN IP? In the past with the WAN IP in that field, requests to the radius server came from the LAN IP. Sorry for the double post..... Christopher Iarocci Network Solutions Manager Twin Forks Office Products 631-727-3354 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Buechler Sent: Friday, January 09, 2009 1:34 AM To: [email protected] Subject: Re: [pfSense Support] Multi-WAN PPTP? On Wed, Jan 7, 2009 at 7:29 PM, Christopher Iarocci <[email protected]> wrote: > I also noticed that when I save the config, it shows the PPTP server address > as 0.0.0.0 in the log, even though I clearly have the WAN IP address in that > field. There's at least one problem, that has to be an IP on your LAN, assuming you're putting the PPTP clients on your LAN subnet. I don't know how that ever could have worked. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
