On the increasingly rare occasions I set up PPTP, I put the server on .15 and clients starting at .16 for the LAN subnet. If your client 'subnet' does not begin on a CIDR boundary, pfSense will complain. Hence, the .16 choice.
Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 ----- "Christopher Iarocci" <[email protected]> wrote: > Chris, > > Thank you. I will try the new config tonight and report back. > > Christopher Iarocci > Network Solutions Manager > Twin Forks Office Products > 631-727-3354 > > > -----Original Message----- > From: Chris Buechler [mailto:[email protected]] > Sent: Friday, January 09, 2009 2:31 PM > To: [email protected] > Subject: Re: [pfSense Support] Multi-WAN PPTP? > > On Fri, Jan 9, 2009 at 1:08 PM, Christopher Iarocci > <[email protected]> > wrote: > > Chris, > > > > Does it matter which IP address on my LAN it is? Should it be the > LAN IP > of > > the PFSense box, or something other than that? > > > > Just pick an unused IP on your LAN. > > > > Does the radius server see requests coming from the IP address > specified > > there or the LAN IP? In the past with the WAN IP in that field, > requests > to > > the radius server came from the LAN IP. > > > > The IP of the interface closest to the RADIUS server, usually LAN. > The > server IP is just for PPTP client - server communication. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > Commercial support available - https://portal.pfsense.org --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
