David I am not very technical. My server room is far away from my internet connection at my home. So there is only one cable going from the internet to server room. I am still reading about VLAN so that I understand its working better.
Anil ________________________________ From: David Burgess <[email protected]> To: [email protected] Sent: Sunday, October 4, 2009 7:25:40 PM Subject: Re: [pfSense Support] VLAN Capable switch On Sun, Oct 4, 2009 at 6:15 PM, Anil Garg <[email protected]> wrote: > I have a pfsense with two 10/100 PCI cards (acting as LAN & WAN router). > I have a 4 port (quad) 10/100 PCI (ZNYX ZX374) card. > If I were to add this card into the box and then add those ports and bridge > them with each other (completely away from LAN WAN) will those four ports > act like a VLAN capable switch? I don't don't have a VLAN capable switches > and by introducing this will I be able to run a VLAN based segmented > network. Why bridge multiple interfaces, then separate them as vlans with no vlan-capable switch? Wouldn't you get the same effect by just running the separate interfaces as separate LANs? Just asking. db --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
