----- "Tim Nelson" <[email protected]> wrote: > ----- "Evgeny Yurchenko" <[email protected]> wrote: > > > > When you restart pfSense does RIP work? What MBUF usage shows? Does > it > > > > continuously grow? > > Evgeny. > > > > RIP works for a little while upon reboot, then after about 30 minutes > or so, stops. The logs say nothing of consequence other than what I've > posted already. > > However, upon first boot, MBUF usage is this: 426 /645 and RIP works > fine. Then, later, MBUF usage jumps up and RIP stops working. VERY > odd. And, I know there is no traffic through this box since the other > 5 NICs are not connected to anything. Only one is connected to my > management network... > > I've been using RIPv2 but for 'gits and shiggles' I'll try RIPv1 and > see if that makes any difference. I'm rather stumped on this one... >
Well, for some reason, The system has been online and working properly now for nearly 4 days. The only setting that has been changed is going to RIPv1 instead of the previously selected RIPv2. Why this makes any difference, I don't know. Thanks all for the help. I'll continue to look into the MBUF area as it still interests me. :-) Tim Nelson Systems/Network Support Rockbochs Inc. (218)727-4332 x105 --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
