Tim Nelson wrote:
----- "Tim Nelson" <[email protected]> wrote:
----- "Evgeny Yurchenko" <[email protected]> wrote:
When you restart pfSense does RIP work? What MBUF usage shows? Does
itcontinuously grow?
Evgeny.
RIP works for a little while upon reboot, then after about 30 minutes
or so, stops. The logs say nothing of consequence other than what I've
posted already.
However, upon first boot, MBUF usage is this: 426 /645 and RIP works
fine. Then, later, MBUF usage jumps up and RIP stops working. VERY
odd. And, I know there is no traffic through this box since the other
5 NICs are not connected to anything. Only one is connected to my
management network...
I've been using RIPv2 but for 'gits and shiggles' I'll try RIPv1 and
see if that makes any difference. I'm rather stumped on this one...
Well, for some reason, The system has been online and working properly now for
nearly 4 days. The only setting that has been changed is going to RIPv1 instead
of the previously selected RIPv2. Why this makes any difference, I don't know.
Thanks all for the help. I'll continue to look into the MBUF area as it still
interests me. :-)
Tim Nelson
Systems/Network Support
Rockbochs Inc.
(218)727-4332 x105
Has MBUF been growing since you switched to RIPv1?
Evgeny.
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
