Don't forget to add firewall rules to allow PPTP traffic.
Via Firewall - Rules - PPTP tab
Easiest rule for testing is an allow all rule which allows any protocol,
any source, any destination.
If that works, finetune the rules as you see fit.
H.
Fabio Rampazzo Mathias wrote:
Joseph,
1. Choose VPN -> PPTP
2. Mark the option "Enable PPTP server"
3. Choose a server address (a different IP of your server, be sure it
is configured as a Virtual IP) and Remote address range.
Here my gateway is 192.168.7.1 and has a Virtual IP (CARP)
192.168.7.35 wich is the IP I fill the "Server address" in PPTP. On
"Remote Address" I've filled 192.168.7.208 since the mask is 28.
4. Save the configuration
5. Choose the "Users" tab
6. Add users you want (you don't need to specify an IP address for users).
Think it's done.
Cya
On Tue, Jan 19, 2010 at 12:59 AM, Joseph Rotan <[email protected]
<mailto:[email protected]>> wrote:
Hi,
after installing pfsense i'm having difficulties configuring VPN
PPTP on it is there anyone can help me out it configuring from basic.
Joseph.
On Fri, Jan 8, 2010 at 11:41 PM, bsd <[email protected]
<mailto:[email protected]>> wrote:
Hello,
Can someone let me know if there is a way to reset the default
timeout for PPTP timeout on pfSense.
It looks like the default timeout is set to something like
5min and I'd like to a much longer period.
Which file / config parameter should I modify ?
Thanks.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober ---> PGP ID --> 0x1BA3C2FD
bsd @at@ todoo.biz <http://todoo.biz/>
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
P "Please consider your environmental responsibility before
printing this e-mail"
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
<mailto:[email protected]>
For additional commands, e-mail: [email protected]
<mailto:[email protected]>
Commercial support available - https://portal.pfsense.org
<https://portal.pfsense.org/>
