Hi, i have setup my VPN configuration according to the steps below and have ip address range on 10.0.10.X :
Here my gateway is 10.0.20.1 and has a Virtual IP (CARP) 10.0.20.35 wich is the IP I fill the "Server address" in PPTP. On "Remote Address" I've filled 10.0.20.208 since the mask is 28. Then i configure VPN setup on my laptop that is connected to the internet and put 10.0.20.1 as a IP adress destination but when i try to connect i get an Error 651. Please advise on how to achieve a correct VPN setup from my laptop or from the pfsense configuration. Thanks, Joseph. On Wed, Jan 20, 2010 at 12:35 AM, Fabio Rampazzo Mathias <[email protected] > wrote: > Joseph, > > 1. Choose VPN -> PPTP > > 2. Mark the option "Enable PPTP server" > > 3. Choose a server address (a different IP of your server, be sure it is > configured as a Virtual IP) and Remote address range. > > Here my gateway is 192.168.7.1 and has a Virtual IP (CARP) 192.168.7.35 > wich is the IP I fill the "Server address" in PPTP. On "Remote Address" I've > filled 192.168.7.208 since the mask is 28. > > 4. Save the configuration > > 5. Choose the "Users" tab > > 6. Add users you want (you don't need to specify an IP address for users). > > Think it's done. > > Cya > > > On Tue, Jan 19, 2010 at 12:59 AM, Joseph Rotan <[email protected]>wrote: > >> Hi, >> >> after installing pfsense i'm having difficulties configuring VPN PPTP on >> it is there anyone can help me out it configuring from basic. >> >> Joseph. >> >> >> >> >> On Fri, Jan 8, 2010 at 11:41 PM, bsd <[email protected]> wrote: >> >>> Hello, >>> >>> Can someone let me know if there is a way to reset the default timeout >>> for PPTP timeout on pfSense. >>> It looks like the default timeout is set to something like 5min and I'd >>> like to a much longer period. >>> >>> Which file / config parameter should I modify ? >>> >>> >>> Thanks. >>> >>> >>> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ >>> Gregober ---> PGP ID --> 0x1BA3C2FD >>> bsd @at@ todoo.biz >>> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ >>> >>> P "Please consider your environmental responsibility before printing this >>> e-mail" >>> >>> >>> >>> --------------------------------------------------------------------- >>> To unsubscribe, e-mail: [email protected] >>> For additional commands, e-mail: [email protected] >>> >>> Commercial support available - https://portal.pfsense.org >>> >>> >> >
