Hi,
I am trying to make OpenVPN work (for the very first time in my life).
At home I have a single WAN, at the office I have a DUAL WAN (one SDSL,
with fix IP - and one ADSL with a Dynamic IP).
MultiWAN in my case is only used for fast ADSL at the office, and
coworkers(vpn) & mail all come in over the SDSL.
I try to connect to the fixed IP, and this goes as far as it works for
connecting (I guess, at reading the logs) - but in the OpenVPN I notice
that it still tries to use the Gateway of the ADSL (the dynamic one))
The log shows "Peer connection initiated...", but no "Init Sequence
completed".
I already added on the office site, custom options :
management 127.0.0.1 1194; local <ip-sdsl>; route-gateway <gw-sdsl>;
But reading the logs it keeps trying to use the gateway of my adsl.
I can see that my home-adsl is coming in... I haven't added the tun
adaptor yet - I guess not doing this, will allow ALL traffic for now ?
What am I missing here... can someone point me in a direction...
SIDENOTE:
----------
When however using the ADSL side (at the office, all works fine (besides
the OpenVPN monitor - it shows nothing is connected, though pings are
being replied - and remote desktop to the server is working fine (it
looks faster than over IPSEC, but I guess that'll be because I am the
only one connecting over the ADSL line).
When connecting to ADSL, I gave the custom options "management 127.0.0.1
1194; local name.dyndns.org;"
I'd really like to have the OpenVPN working on the second WAN (in this
case SDSL) - should I add a static route, and if so from where should it
be initiated ?
Another note : I did use IPSEC before, and I've disabled it on both ends
(home & office) - so they are not interferring.
Kind regards,
Michel
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
