Hi, I am experiencing a problem with my pfSense installation(s) at one of my sites,my only US site. The same installation on the same hardware has worked perfectly at all my non US locations (6). (US info provided only because I am not based in US and thus am hoping someone based there may have experienced this).
In short, I have run pfSense 1.2.2 and pfSense 1.2.3 at this site, using a Dell 1950 machine and also running the machines under VM's (ESXI) on different hardware and have changed the NIC interface on the VM's from flexible to E1000 and still no luck. When the machine is set as the default gateway with no proxy specified *Transparent enabled* the users can get excellent download / upload speeds. However the moment they set the same machine as their proxy, speed drops to between 8 - 11Kb/sec (Always within this range, regardless of hardware pfSense is running on). I have changed my link provider to see if this solves the problem but the same is experienced with both. (old on 1.2.2, new on 1.2.3). Does anyone have any idea's on what could cause this and how it can be resolved? Thank you in advance. Dominic. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
