On Fri, May 21, 2010 at 11:05 PM, Dominic <[email protected]> wrote: > Hi, > > I am experiencing a problem with my pfSense installation(s) at one of > my sites,my only US site. > The same installation on the same hardware has worked perfectly at all > my non US locations (6). > (US info provided only because I am not based in US and thus am hoping > someone based there > may have experienced this). > > In short, I have run pfSense 1.2.2 and pfSense 1.2.3 at this site, > using a Dell 1950 machine and also > running the machines under VM's (ESXI) on different hardware and have > changed the NIC interface > on the VM's from flexible to E1000 and still no luck. > > When the machine is set as the default gateway with no proxy specified > *Transparent enabled* the > users can get excellent download / upload speeds. However the moment > they set the same machine > as their proxy, speed drops to between 8 - 11Kb/sec (Always within > this range, regardless of hardware > pfSense is running on). > > I have changed my link provider to see if this solves the problem but > the same is experienced with both. > (old on 1.2.2, new on 1.2.3). > > Does anyone have any idea's on what could cause this and how it can be > resolved? >
http://doc.pfsense.org/index.php/Squid_Package_Tuning --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
