It sounds to me like you already answered your own question. You said he plugged his xbox directly into a public ip "bypassing his router", I assume you mean bypassing the firewall/router not the CPE device acting as a bridge or router from the ISP (without which you dont have internet). If you have bypassed pfSense and still have problems with his xbox, it is either his XBOX or its the ISP filtering your traffic. It doesn't matter that you did some custom setup on the firewall, if you bypass it then its not part of your issue when failure still occurs.
Unless your referring to him having a linksys router in his room and then that gets a public IP from the "LAN" of the pfSense box (like a dorm setup or something), you already ruled out the pfSense by having him plug in directly. I assume you are just bridging your LAN to your WAN for getting public IP's to the LAN? -- Trevor Benson dCAP, LPIC-1, CLA, Network+, MCP, CNA A1 Networks - Network Engineer DID (707)703-1041 FAX (707)703-1983 On May 11, 2010, at 5:09 PM, Chris Flugstad wrote: > So I have a pfsense router in a buidling DHCP'ing pub ip's on the LAN. I > have a user that can connect his xbox 360 online to xbox live but cannot > connect to other players or join parties. He has tried plugging his xbox > directly bypassing his router and giving his xbox a pub ip. this does not > work. i wonder if something would need to be set in pfsense to allow this to > work? > > Again, I have public ip's on the inside of my network so i do not have NAT > for any of you who are going to respond with responses that would point me > into doing fw changes for NAT --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
