I did some more testing..... If both the LAN and WAN ports negotiate 1000 mbps, i can run 100 mbps FD through the router. However if either or both the WAN and/or LAN ports negotiate 100 mbps, I can only run 100 mbps down and ~ 50 mbps up. Can anyone else confirm this?
Regards, Christian On Fri, Oct 22, 2010 at 3:26 AM, James Bensley <jwbens...@gmail.com> wrote: > On 21 October 2010 20:39, Christian Borchert <ccb...@gmail.com> wrote: > > I have upgraded the BIOS to the latest (2.6.4 iirc) and that has not > > resolved the issue. I have tried with the onboard broadcom nic and a > single > > intel pci gigabit nic, and also a single intel pcie nic. No change in > > throughput. > > Perhaps you have hit the mobo limits then? Try over clocking the board > just temporarily and see if make any differences? > > -- > Regards, > James. > > http://www.jamesbensley.co.cc/ > > There are 10 kinds of people in the world; Those who understand > Vigesimal, and J others...? > > --------------------------------------------------------------------- > To unsubscribe, e-mail: support-unsubscr...@pfsense.com > For additional commands, e-mail: support-h...@pfsense.com > > Commercial support available - https://portal.pfsense.org > >
