Does anyone have a working example with this combination...
Are there things to look for ?
I have tried to follow the book - but somehow the VPN doesn't come up...
I can ping the first 10.8.0.1 (but I guess this is the OpenVPN server of
pfSense itself ?)
I have created the shared key, and pasted this in both the
Linksys(tomato) and into pfSense... but it seems not to connect correctly ?
The local network has 192.168.150.0/24 (this is where pfSense is)
The remote network has 172.21.190.0/24 (this is where the TomatoVPN
is running).
I decided to take 10.8.0.0/24 as OpenVPN network (on both sides -
TomatoVPN suggests this as default).
I furthermore opened port 1195/udp on pfSense... should 1195/udp also be
opened on the TomatoVPN (the WRT54 is acting as client, so I would
presume not).
Kind regards,
Michel
(I am used in using IPSEC... which works just fine, but I would like to
move over to OpenVPN due to cheaper hardware of Linksys)
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
