-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi List, >>The Teak 3035 uses the serial port 1 to communicate with the LCM. I have now got a Teak 3035S from :- http://linitx.com/viewproduct.php?prodid=12711 The unit is brilliant, but I have the issue with the LCD panel as well. I have PF v1.2.3 installed and working brilliantly and I also installed the lcpproc package, but this is where the issues started. The Serial Port detected but PF is /dev/caud1 and the lcdproc package expects the port to be /dev/cau1 I changed all references in all the files to /dev/caud1 and left the driver as pyramid, this got me to a stage where teh LCD now just cycles with the word 'Initializing...' and then goes blank and restarts the LCD and show 'Initializing...' again and again... but never shows any real info. The LCD is a 2 row x 20 column display, but I have no way to find out what driver it needs from the list in the lcdproc package... Can anyone point me in the correct direction, otherwise this is a >£600 unit that i could replace with a ~£300 (like these units :- http://linitx.com/viewproduct.php?prodid=12508 or this unit that has *2* alix 3 NIC units in a 1U chassis for £312.42 http://linitx.com/viewproduct.php?prodid=12915 ) I have also tried to contact the manufacturers of the Teak unit @ http://www.arinfotek.com/product.php?gid=1&pid=52 with no success. - -- Gavin Spurgeon. AKA Da Geek - ---------------------------------------------------------------------- "The happiest of people don't necessarily have the best of everything, they just make the most of everything that comes along their way.." -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.12 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkzpRZ8ACgkQvp6arS3vDir4fwCfd/bOXDsCDeFWFfJOs3LB2tHP /psAnjpAqMNqUWLr0ijuSEUplaGjVn3w =Fioj -----END PGP SIGNATURE----- -- This message was scanned by DaGeek Spam Filter and is believed to be clean. --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
