Op 22-11-2010 10:43, bsd schreef:
Hello Gavin,
From my point of view (and as far as I am informed) you will have to build
your own LCD driver.
As a reseller of this hardware, I was in touch with the manufacturer, and I
think you will have to use the provided C program and example (provided with
the driver CD) in order to build your own drivers (unless you know the LCD
chipset and ref they are using, but It looks like they might be using some not
so common HW)…
If you want we can try to sponsor something in order to have It work… ?
I'll try to get in touch again with the manufacturer to try to have precise
info about the LCD model they are using.
Try to find out what sort of emulation the screen uses, most likely it
will use one of the existing drivers for output.
Each driver is specific to a display, most communicate via serial, usb
serial or parallel port interfaces.
You will need to find out if it uses a existing signaling method via the
supplier. If it does not use some sort of existing signaling I would
press the vendor for providing a lcdproc driver.
Regards,
Seth
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
