I am attempting to use Shrewsoft VPN Client to connect to a Cisco VPN
Concentrator at work. I had no issue connecting while using m0n0wall, but
now that I have switched to pfSense I have been unable to get it to work
correctly.
The client appears to connect and displays the Client Login Banner. After
approx 20-30 seconds the connection drops.
I have attempted to use all kinds of suggestions from the forums and other
sources with no luck.
Below is what I used to get it to at least connect for the short time it
does.
*Mode:* *Automatic outbound NAT rule generation
(IPsec passthrough included)* *Manual Outbound NAT rule
generation
(AON - Advanced Outbound NAT)*
* Mappings:* InterfaceSourceSource PortDestinationDestination PortNAT
AddressNAT PortStatic
PortDescription<http://192.168.1.1:666/firewall_nat_out_edit.php>WAN
192.168.1.0/24**500**YESAuto created rule for LAN to WAN
<http://192.168.1.1:666/firewall_nat_out_edit.php?id=0><http://192.168.1.1:666/firewall_nat_out_edit.php?dup=0>WAN
192.168.1.0/24**4500**YESAuto created rule for LAN to WAN
<http://192.168.1.1:666/firewall_nat_out_edit.php?id=1><http://192.168.1.1:666/firewall_nat_out_edit.php?dup=1>WAN
192.168.1.0/24*****YESAuto created rule for LAN to WAN
<http://192.168.1.1:666/firewall_nat_out_edit.php?id=2><http://192.168.1.1:666/firewall_nat_out_edit.php?dup=2><http://192.168.1.1:666/firewall_nat_out_edit.php>
Any help would be greatly appreciated.
--DuWayne
