> I thought so, but that does not seem to work either. Make sure you power cycle the router that is passing that subnet to your firewall. I had this same issue when I set this up, and racked my head for hours before doing that.
I opted for the separate interface approach when I did the install (which works great) You will want to setup the Virtual IPs first, then power cycle the router. It will then arp out when it boots and get the IPs routed correctly. -Tim --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
