On 3/8/2011 5:38 PM, k_o_l wrote: > Just under address pool I had 10.168.2.0/24, I'm fine with not getting /24 > with the new setup, as long as I can communicate client-to-client and of > course resolve the issue with the quad zero gateway
That's fine, it will take /30's out of that /24 - that's normal, but the client only sees a /30, a point to point link between the client's IP and the server's IP. If you check the box to redirect the gateway, then OpenVPN should push a new default gateway to the client. Can you show the routing table from the client side so we can better see what the problem is? (On BSD and such it's usually "netstat -rn", on windows it's "route print") Also, if the client is on Windows Vista or 7, make sure you are running the client as Administrator or it can't alter the routes. Jim --------------------------------------------------------------------- To unsubscribe, e-mail: support-unsubscr...@pfsense.com For additional commands, e-mail: support-h...@pfsense.com Commercial support available - https://portal.pfsense.org