Op 8 jul 2011, om 09:27 heeft Johan Hendriks het volgende geschreven: > WAN PPTP. > WAN ip adres 10.0.0.100 > Connect to 10.0.0.138, the ip address of the ADSL modem. > > I see a lot of drops on 10.0.0.100 to 10.0.0138 and visa versa in the > firewall logs. > some show TCP, enght.
1. Disable the "block private networks" on the WAN. 2. You are not still really using a Alcatel Lucent/Thomson Speedtouch Home are you? It uses a 10/8 subnet mask for the LAN causing havoc with VPNs. All the new models use 192.168.x.1 for the LAN side of things. 3. Configure the modem with a different configuration file that sets the modem up as a PPPoA bridge device, you then get the public IP on pfSense using PPPoE or DHCP. The KPN website has a couple of these and installer files for instructions. Regards, Seth --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
