Seth Mos schreef:
Op 8 jul 2011, om 09:27 heeft Johan Hendriks het volgende geschreven:
WAN PPTP.
WAN ip adres 10.0.0.100
Connect to 10.0.0.138, the ip address of the ADSL modem.
I see a lot of drops on 10.0.0.100 to 10.0.0138 and visa versa in the firewall
logs.
some show TCP, enght.
1. Disable the "block private networks" on the WAN.
2. You are not still really using a Alcatel Lucent/Thomson Speedtouch Home are
you? It uses a 10/8 subnet mask for the LAN causing havoc with VPNs. All the
new models use 192.168.x.1 for the LAN side of things.
3. Configure the modem with a different configuration file that sets the modem
up as a PPPoA bridge device, you then get the public IP on pfSense using PPPoE
or DHCP. The KPN website has a couple of these and installer files for
instructions.
Regards,
Seth
1) done already.
2) Yes we still do.
What modem do you advice other then the Thomson Speed touch
3) i will try that on monday, expirimenting a little bit.
Strang it works in PFSence 1.2.3 flawlessly.
Thanks for the pointers.
regards,
Johan Hendriks
---------------------------------------------------------------------
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
Commercial support available - https://portal.pfsense.org
