Have you configured pfsense as gateway for your machine ? And have you configured an outgoing nat rule
RDM Strada del Villaretto 175/5/C 10156 Torino (IT) Mob. 393.5267118 Skype enricoc.skype ----- Reply message ----- Da: "Mark Respinger" <[email protected]> A: <[email protected]> Oggetto: [pfSense Support] PPPoE Internet is not accessible to clients on LAN Data: lun, lug 18, 2011 15:26 This is my first time trying to set up a pfSense system and I am struggling to get to Internet accessible to users machines. My setup is as follows: - pfSense 2.0 RC3 running in VirtualBox on a machine on the network - not directly connected to WAN - pfSense has DHCP turned on and all machines are able to both receive IP addresses and access pfSense's config page - pfSense is able to connect to my ISP via PPPoE. Connectivity can be verified by the fact that I am able to download and install pfSense packages from within the web-interface. - No other computers on the network (including the one that is hosting VirtualBox) are able to access the Internet. - pfSense is connecting to the same network from both LAN and WAN, but is connecting through PPPoE to WAN. I would really appreciate it is someone could explain how to make pfSense share the internet with other computers on the network. Cheers, Mark --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
