After reading the last two posts in this thread: http://forum.pfsense.org/index.php?topic=28649.0 I'm fairly certain that the problem displayed in the logs below is also due the problem described with mpd. However, I've noticed that there are two different mpd binaries present in /usr/local/sbin: -r-xr-xr-x 1 root wheel 460256 Jun 21 16:51 mpd4 -r-xr-xr-x 1 root wheel 519364 Jun 21 16:51 mpd5
Does anyone know which one is being used and from where it's called? -----Original Message----- From: Chris Clark [mailto:[email protected]] Sent: Sunday, July 24, 2011 12:34 PM To: [email protected] Subject: [pfSense Support] Pantech UML290 Greetings everyone, I bought a Pantech UML290 for Verizon's LTE service yesterday and have been attempting to get it working with pfSense 2.0RC3 since then. This morning I've been able to get connection established, but something in pfSense immediately terminates it, citing an invalid argument. This is my procedure and what I've had to do: Configuration (with UML290 connected): Comment out this line in /usr/local/mpd.script: set $modemCmd "+CGDCONT=$APNum, \"IP\", \"$APN\" Go through this procedure here: http://doc.pfsense.org/index.php/Configuring_3G_modems Enter Username: [Number]@vzw4g.com Enter Password: vzw Phone Number: *99***3# Add PPP interface to WAN/OPT1 and leave interface disabled. Procedure: Connect UML290 to a Windows box running VZAM and establish connection there. Remove from Windows box and connect to pfSense box. Enable WAN/OPT1 interface. I then see the following in the logs (taken from both WAN and OPT1 association tries)(also attached): Jul 24 08:24:26 ppp: [opt1_link0] chat: Connected at 100000000. Jul 24 08:24:26 ppp: [opt1_link0] MODEM: chat script succeeded Jul 24 08:24:26 ppp: [opt1_link0] Link: UP event Jul 24 08:24:26 ppp: [opt1_link0] LCP: Up event Jul 24 08:24:26 ppp: [opt1_link0] LCP: state change Starting --> Req-Sent Jul 24 08:24:26 ppp: [opt1_link0] LCP: SendConfigReq #1 Jul 24 08:24:26 ppp: [opt1_link0] ACFCOMP Jul 24 08:24:26 ppp: [opt1_link0] PROTOCOMP Jul 24 08:24:26 ppp: [opt1_link0] ACCMAP 0x000a0000 Jul 24 08:24:26 ppp: [opt1_link0] MRU 1500 Jul 24 08:24:26 ppp: [opt1_link0] MAGICNUM 72df4860 Jul 24 08:24:26 ppp: [opt1_link0] LCP: rec'd Configure Request #0 (Req-Sent) Jul 24 08:24:26 ppp: [opt1_link0] ACCMAP 0x00000000 Jul 24 08:24:26 ppp: [opt1_link0] AUTHPROTO CHAP MD5 Jul 24 08:24:26 ppp: [opt1_link0] MAGICNUM cf64b9c6 Jul 24 08:24:26 ppp: [opt1_link0] PROTOCOMP Jul 24 08:24:26 ppp: [opt1_link0] ACFCOMP Jul 24 08:24:26 ppp: [opt1_link0] LCP: SendConfigAck #0 Jul 24 08:24:26 ppp: [opt1_link0] ACCMAP 0x00000000 Jul 24 08:24:26 ppp: [opt1_link0] AUTHPROTO CHAP MD5 Jul 24 08:24:26 ppp: [opt1_link0] MAGICNUM cf64b9c6 Jul 24 08:24:26 ppp: [opt1_link0] PROTOCOMP Jul 24 08:24:26 ppp: [opt1_link0] ACFCOMP Jul 24 08:24:26 ppp: [opt1_link0] LCP: state change Req-Sent --> Ack-Sent Jul 24 08:24:26 ppp: [opt1_link0] LCP: rec'd Configure Ack #1 (Ack-Sent) Jul 24 08:24:26 ppp: [opt1_link0] ACFCOMP Jul 24 08:24:26 ppp: [opt1_link0] PROTOCOMP Jul 24 08:24:26 ppp: [opt1_link0] ACCMAP 0x000a0000 Jul 24 08:24:26 ppp: [opt1_link0] MRU 1500 Jul 24 08:24:26 ppp: [opt1_link0] MAGICNUM 72df4860 Jul 24 08:24:26 ppp: [opt1_link0] LCP: state change Ack-Sent --> Opened Jul 24 08:24:26 ppp: [opt1_link0] LCP: auth: peer wants CHAP, I want nothing Jul 24 08:24:26 ppp: [opt1_link0] LCP: LayerUp Jul 24 08:24:26 ppp: [opt1_link0] LCP: rec'd Discard Request #1 (Opened) Jul 24 08:24:26 ppp: [opt1_link0] CHAP: rec'd CHALLENGE #1 len: 35 Jul 24 08:24:26 ppp: [opt1_link0] Name: "UMTS_CHAP_SRVR" Jul 24 08:24:26 ppp: [opt1_link0] CHAP: Using authname "[email protected]" Jul 24 08:24:26 ppp: [opt1_link0] CHAP: sending RESPONSE #1 len: 41 Jul 24 08:24:26 ppp: [opt1_link0] CHAP: rec'd SUCCESS #1 len: 4 Jul 24 08:24:26 ppp: [opt1_link0] LCP: authorization successful Jul 24 08:24:26 ppp: [opt1_link0] Link: Matched action 'bundle "opt1" ""' Jul 24 08:24:26 ppp: [opt1_link0] Link: Join bundle "opt1" Jul 24 08:24:26 ppp: [opt1] Bundle: Status update: up 1 link, total bandwidth 100000000 bps Jul 24 08:24:26 ppp: [opt1] can't config [21]:: Invalid argument Jul 24 08:24:26 ppp: fatal error, exiting Jul 24 08:24:26 ppp: [opt1] IFACE: Close event Jul 24 08:24:26 ppp: [opt1] IPCP: Close event Jul 24 08:24:26 ppp: [opt1] Bundle: Shutdown Jul 24 08:24:26 ppp: [opt1_link0] Link: Shutdown Jul 24 08:24:26 ppp: process 38992 terminated Jul 24 08:32:35 ppp: [wan_link0] chat: Connected at 100000000. Jul 24 08:32:35 ppp: [wan_link0] MODEM: chat script succeeded Jul 24 08:32:35 ppp: [wan_link0] Link: UP event Jul 24 08:32:35 ppp: [wan_link0] LCP: Up event Jul 24 08:32:35 ppp: [wan_link0] LCP: state change Starting --> Req-Sent Jul 24 08:32:35 ppp: [wan_link0] LCP: SendConfigReq #1 Jul 24 08:32:35 ppp: [wan_link0] ACFCOMP Jul 24 08:32:35 ppp: [wan_link0] PROTOCOMP Jul 24 08:32:35 ppp: [wan_link0] ACCMAP 0x000a0000 Jul 24 08:32:35 ppp: [wan_link0] MRU 1500 Jul 24 08:32:35 ppp: [wan_link0] MAGICNUM 24c14c1c Jul 24 08:32:35 ppp: [wan_link0] LCP: rec'd Configure Request #0 (Req-Sent) Jul 24 08:32:35 ppp: [wan_link0] ACCMAP 0x00000000 Jul 24 08:32:35 ppp: [wan_link0] AUTHPROTO CHAP MD5 Jul 24 08:32:35 ppp: [wan_link0] MAGICNUM cf6d11e0 Jul 24 08:32:35 ppp: [wan_link0] PROTOCOMP Jul 24 08:32:35 ppp: [wan_link0] ACFCOMP Jul 24 08:32:35 ppp: [wan_link0] LCP: SendConfigAck #0 Jul 24 08:32:35 ppp: [wan_link0] ACCMAP 0x00000000 Jul 24 08:32:35 ppp: [wan_link0] AUTHPROTO CHAP MD5 Jul 24 08:32:35 ppp: [wan_link0] MAGICNUM cf6d11e0 Jul 24 08:32:35 ppp: [wan_link0] PROTOCOMP Jul 24 08:32:35 ppp: [wan_link0] ACFCOMP Jul 24 08:32:35 ppp: [wan_link0] LCP: state change Req-Sent --> Ack-Sent Jul 24 08:32:35 ppp: [wan_link0] LCP: rec'd Configure Ack #1 (Ack-Sent) Jul 24 08:32:35 ppp: [wan_link0] ACFCOMP Jul 24 08:32:35 ppp: [wan_link0] PROTOCOMP Jul 24 08:32:35 ppp: [wan_link0] ACCMAP 0x000a0000 Jul 24 08:32:35 ppp: [wan_link0] MRU 1500 Jul 24 08:32:35 ppp: [wan_link0] MAGICNUM 24c14c1c Jul 24 08:32:35 ppp: [wan_link0] LCP: state change Ack-Sent --> Opened Jul 24 08:32:35 ppp: [wan_link0] LCP: auth: peer wants CHAP, I want nothing Jul 24 08:32:35 ppp: [wan_link0] LCP: LayerUp Jul 24 08:32:35 ppp: [wan_link0] LCP: rec'd Discard Request #1 (Opened) Jul 24 08:32:35 ppp: [wan_link0] CHAP: rec'd CHALLENGE #1 len: 35 Jul 24 08:32:35 ppp: [wan_link0] Name: "UMTS_CHAP_SRVR" Jul 24 08:32:35 ppp: [wan_link0] CHAP: Using authname "[email protected]" Jul 24 08:32:35 ppp: [wan_link0] CHAP: sending RESPONSE #1 len: 41 Jul 24 08:32:35 ppp: [wan_link0] CHAP: rec'd SUCCESS #1 len: 4 Jul 24 08:32:35 ppp: [wan_link0] LCP: authorization successful Jul 24 08:32:35 ppp: [wan_link0] Link: Matched action 'bundle "wan" ""' Jul 24 08:32:35 ppp: [wan_link0] Link: Join bundle "wan" Jul 24 08:32:35 ppp: [wan] Bundle: Status update: up 1 link, total bandwidth 100000000 bps Jul 24 08:32:35 ppp: [wan] can't config [e]:: Invalid argument Jul 24 08:32:35 ppp: fatal error, exiting Jul 24 08:32:35 ppp: [wan] IFACE: Close event Jul 24 08:32:35 ppp: [wan] IPCP: Close event Jul 24 08:32:35 ppp: [wan] Bundle: Shutdown Jul 24 08:32:35 ppp: [wan_link0] Link: Shutdown Jul 24 08:32:35 ppp: process 8764 terminated If I attempt to connect again after this without removing the modem and attaching it to a Windows box, it says that the modem isn't responding to AT commands. I assume this is because the modem maintains the established connection but pfSense has terminated the PPP session. If I restart the pfSense box and attempt to connect again without first connecting the UML290 to a Windows box, I see the error "invalid init string" in the logs. Does anyone have any ideas on how to get this to work? Chris --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] Commercial support available - https://portal.pfsense.org
