Hi Sam,
How was it jumpered when you got it? This is just a guess, but
could it be that pins 1 and 2 select com port 1 or 2 and pins 3,4,5
and 6 select the the IRQ, 4,3,5 or 2? Pins 1 and 2 could also be a
binary sort of thing that will select com 1 thru 4 depending on how
they are jumpered. None for com 1, 1 for com 2, 2 for com 3, both
for com 4.
On 13 Oct 99, at 13:08, Samuel W. Heywood wrote:
> Hi Folks,
>
> I have recently acquired a Cardinal Technologies 14400 modem, model
> number 10750. I have no documentation. Cardinal Technologies went
> out of business a couple of years ago and of course no longer provides
> technical support. I should like to configure this modem so that it is
> set up for COM port 2, IRQ 3. The modem has 12 jumper pins arranged in
> six rows of a column of two. The numbering of the pins does not seem to
> provide any clues as to which pins are for what. It looks like this:
>
> 6 . . 2
> 5 . . 5
> 4 . . 3
> 3 . . 4
> 2 . . no number
> 1 . . no number
>
> Does anyone have a Cardinal modem with a similar arrangement and
> numbering of jumper pins? If so, and if you have the documentation,
> please tell me how you set it up for the various com ports and IRQ's. I've
> already conducted many experiments of the wild guess and trial and error
> method. So far I haven't been able to figure anything out. Please help!
>
> Sam Heywood
> variou
>
> Net-Tamer V 1.11.2 - Registered
>
> To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
> unsubscribe SURVPC in the body of the message. Also, trim this footer from
> any quoted replies.
>
>
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
