On 29 Apr 2000, at 12:07, FLW wrote:
> I have 32 megs of memory on the motherboard. There are 4 8-meg
> EDO 72pin sticks in banks 0 and 1 (two in each bank). There is
> one open (168 pin) sdram slot on the MB.
>
> Question: Is it possible to expand the memory by placing a 168
> pin sdram stick in the unused sdram slot, keeping the existing
> EDO ram? Is EDO ram compitable with SDRAM?
>
> I have been told by one supplier that they are compatible, by
> another supplier that they are not. I would like to confirm which
> is technically correct.
>
You will have to check your motherboard's install guide. On many of
these older boards, you have to mix and match memory banks(on
my board I can't use simm banks 1+2 with the dimm banks used).
Check the website of the manufacturer for a downloadable manual.
Joe
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
