Think this is on topic. Having at least three 9 dot printers
who are still in use and are far more cheaper to run than
jet or laser printers I found that from two of them the
pins or at least one of the pins gets stuck in the textile
of the lint. With my Epson LX 86 this happens especially if
I make a long line and with the Star ?? this happens at
will. With the Epson I have learned to dismiss all lines but
with the Star printer I have no easy remedy. Formerly there
where people who serviced these kind of machines but I
think they are all out of business.
Does some one on the list know how to service the pin head?
The head can be easily removed from its holder and I could
detect the parts. But before I unscrew the magnetic had from
the steel pens I want o have advice what to do next.
Is it enough to flatten the pens evenly? Should they
retract completely into its plastic front end or should they
stick out and how far. Any help in getting the printers up
and running without problems is appreciated.
--
"A MILLION HERE, A MILLION THERE-SOONER OR LATER IT ADDS UP TO
REAL MONEY." Everett Dirksen .
NTReader v0.35w(P)/Beta (Registered) in conjunction with Net-Tamer.
To unsubscribe from SURVPC send a message to [EMAIL PROTECTED] with
unsubscribe SURVPC in the body of the message.
Also, trim this footer from any quoted replies.
More info can be found at;
http://www.softcon.com/archives/SURVPC.html
