How do you check the cable and terminator ,
I usualy just run the diagnostics that caome with the card , but that will
just tell you if you have a bad cable , nothing more.
What is the procedure for checking the cable and terminators , Both Thin
ethernet(bnc) and twisted pair. I had a real nasty intermitent problems
with both a card and cable at the same time. Talk about pulling your hair.
Out of frusttration opted to upgrade to hub and 100m mg twisted pair cards.
Turned out real nice , exept for the 486 that wont run 100 mg. Cant win
them all.
At 11:47 AM 12/29/1998 -0500, you wrote:
>
>Yves Van Belle wrote:
>>
>> I had also some problems with an NE2000 PCI NIC, after upgrading and
recompiling the kernel to 2.036 everything works just fine.
>>
>
>Ditto here, I have a Realtek 8029 PCI and it runs fine, under all my
>kernels.
>If you are getting strange errors, I suggest checking your cabling and
>terminators,
>especially terminators.
>
>
>>
>> On Fri, 18 Dec 1998 13:23:43 Massimo Lusetti wrote:
>> >
>> >
>> >I got a full featured LAN with some machines all working good, al the PCs
>> >have 3Com NICs ad one has RealTek RTL 8029 PCI NIC, this one produce
random
>> >error on /var/log/messages after that the network on that specific machine
>> >wont work since reboot is needed.
>> >All this happen randomly!!! producing this error by the kernel in
>> >/var/log/messages
>>
>
>-
>To get out of this list, please send email to [EMAIL PROTECTED] with
>this text in its body: unsubscribe suse-linux-e
>Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
>archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
>
>
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archiv at http://www.suse.com/Mailinglists/suse-linux-e/index.html
