I have an HP scanner (ScanJet IIc) which shows up in my boot log as
follows:
<4> Vendor: HP Model: C1750A Rev: 3125
<4> Type: Processor ANSI SCSI revision: 01
<4>Detected scsi generic sgc at scsi0, channel 0, id 3, lun 0
/etc/sane.d/hp.conf contains:
scsi HP
/dev/sg2
(but I also tried sg0, sg1, sg3 and sg4; all /dev/sg* are
crwxrwxrwx. Under SuSE-Linux-5.3 I used to run my scanner on /dev/sgc,
but after installation of 6.0 I don't see no /dev/sg[a-z] anymore
)
and /etc/sane.d/dll.conf:
hp
My problem now is that scanimage says that it does not find a SANE
device:
scanimage: no SANE devices found
Who can help me out?
--
Hartelijke groet, Wybo Dekker
___________________Servalys Analytical Chemistry Services__________________
[EMAIL PROTECTED] | Deilsedijk 60 | tel +31-345-652164
www.hobby.nl/~servalys | 4158 CH Deil, The Netherlands | fax +31-345-652383
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
