Dale Grindstaff wrote:
> Wybo Dekker wrote:
>
> > I have an HP scanner (ScanJet IIc) which shows up in my boot log as
> > follows:
> >
> > <4> Vendor: HP Model: C1750A Rev: 3125
> > <4> Type: Processor ANSI SCSI revision: 01
> > <4>Detected scsi generic sgc at scsi0, channel 0, id 3, lun 0
> >
> > /etc/sane.d/hp.conf contains:
> >
> > scsi HP
> > /dev/sg2
> >
> > (but I also tried sg0, sg1, sg3 and sg4; all /dev/sg* are
> > crwxrwxrwx. Under SuSE-Linux-5.3 I used to run my scanner on /dev/sgc,
> > but after installation of 6.0 I don't see no /dev/sg[a-z] anymore
> > )
> >
> > and /etc/sane.d/dll.conf:
> >
> > hp
> >
> > My problem now is that scanimage says that it does not find a SANE
> > device:
> >
> > scanimage: no SANE devices found
> >
> > Who can help me out?
> >
>
> I am having a similar problem with my ScanJet 5p. Xscanimage will not find the
>scanner.
>
> I have temporally solved the problem with this command line argument: "xscanimage
>scsi hp:/dev/sg0."
>
> With this, it works fine. You may substitute "/dev/sg0" with "/dev/scanner" if you
>have made the symlink.
>
> I have not been able get this to work as a plug-in in GIMP. I have experienced this
>problem only with 6.0.
>
> I didn't have it under 5.3. If anyone has a better or more complete solution please
>let me know.
>
> --
> D. R. Grindstaff
>
> Powered by SuSE 6.0!
-
To get out of this list, please send email to [EMAIL PROTECTED] with
this text in its body: unsubscribe suse-linux-e
Check out the SuSE-FAQ at http://www.suse.com/Support/Doku/FAQ/ and the
archive at http://www.suse.com/Mailinglists/suse-linux-e/index.html
