Joop Boonen wrote: > > Dear Jerry, > > Could you please sent me you /usr/src/linux/.config file please? > > Can you playback wave and mpg3 files? No problem. However, my /src/linux/.config is untouched straight off my SuSE 6.0 upgrade, so yours is probably the same as mine. I have waveplayer and mpeg_player installed and running ok. I have downloaded mpg3_player but have not installed it yet. Jerry > > Thank you very much in advance. > > Joop Boonen. > > Jerry Lynn Kreps wrote: > > > Eric, > > Attached is an extract of my log file showing my configuration. > > > > Eric Lum wrote: > > > > > > Does anyone here have any experience with making this sound chip work under > > > SuSE Linux 6.0?; it's attached to the motherboard (Intel 440LX), so is not a > > > true isa sound card at all, so I don't know if working the soundconf module > > > does anything. The only information I have about it, I gained from reading > > > hardware device info, under Win98, as follows: > > > > > > Device: YAMAHA OPL3-SAx WDM Driver > > > Resources: > > > IRQ: 05 > > > I/O: 0220h - 022Fh > > > I/O: 0530h - 0537h > > > I/O: 0388h - 038Fh > > > I/O: 0330h - 0331h > > > I/O: 0370h - 0371h > > > DMA: 00 > > > DMA: 01 > > > > > > I tried as many combinations with the kernel as I could, using MSS/WSS, > > > Yamaha OPL3-SA1, 2, Soundblaster, whatever. No luck (I don't quite > > > understand what all the I/O references mean, what they refer to). I also > > > tried using the latest OSS package downloaded from their site, but I get an > > > 'incompatible kernel' error when I run it (I'm running 2.2.3). Any tips out > > > there? > > > > > > > ------------------------------------------------------------------------ > > > > Card config: > > Yamaha OPL3-SA at 0x530 irq 10 drq 1,0 > > OPL3-SA (SB mode) at 0x220 irq 7 drq 3 > > OPL3-SA MIDI at 0x330 irq 9 > > OPL-2/OPL-3 FM at 0x388 > > > > Audio devices: > > 0: MSS audio codec (CS4231) (DUPLEX) > > 1: Shadow of audio device #0 (DUPLEX) > > 2: OPL3-SA SB (3.1) > > > > Synth devices: > > 0: Yamaha OPL-3 > > > > Midi devices: > > 0: Sound Blaster > > 1: OPL3-SA (MPU401) > > > > Timers: > > 0: System clock > > 1: MSS audio codec (CS4231) > > > > Mixers: > > 0: MSS audio codec (CS4231) > > 1: Sound Blaster
# # Automatically generated make config: don't edit # # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KERNELD=y # # General setup # CONFIG_MATH_EMULATION=y CONFIG_NET=y # CONFIG_MAX_16M is not set CONFIG_PCI=y # CONFIG_PCI_OPTIMIZE is not set CONFIG_SYSVIPC=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_BINFMT_JAVA is not set CONFIG_KERNEL_ELF=y CONFIG_M386=y # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M686 is not set # # Floppy, IDE, and other block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_BLK_DEV_IDESCSI is not set CONFIG_BLK_DEV_IDE_PCMCIA=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_TRITON=y # CONFIG_IDE_CHIPSETS is not set # # Additional Block Devices # # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y CONFIG_MD_STRIPED=y # CONFIG_MD_MIRRORING is not set # CONFIG_MD_RAID5 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_HD is not set # # Networking options # CONFIG_FIREWALL=y CONFIG_NET_ALIAS=y CONFIG_INET=y CONFIG_IP_FORWARD=y CONFIG_IP_MULTICAST=y CONFIG_SYN_COOKIES=y CONFIG_IP_FIREWALL=y CONFIG_IP_FIREWALL_VERBOSE=y CONFIG_IP_MASQUERADE=y # # Protocol-specific masquerading support will be built as modules. # CONFIG_IP_MASQUERADE_IPAUTOFW=y # CONFIG_IP_MASQUERADE_PPTP is not set CONFIG_IP_MASQUERADE_ICMP=y # CONFIG_IP_TRANSPARENT_PROXY is not set CONFIG_IP_ALWAYS_DEFRAG=y CONFIG_IP_ACCT=y # CONFIG_IP_ROUTER is not set # CONFIG_NET_IPIP is not set # CONFIG_IP_MROUTE is not set # CONFIG_IP_ALIAS is not set # # (it is safe to leave these untouched) # CONFIG_INET_PCTCP=y # CONFIG_INET_RARP is not set # CONFIG_NO_PATH_MTU_DISCOVERY is not set CONFIG_IP_NOSR=y # CONFIG_SKB_LARGE is not set # # # CONFIG_IPX=y CONFIG_ATALK=y CONFIG_AX25=y CONFIG_NETROM=y # CONFIG_ROSE is not set # CONFIG_BRIDGE is not set # CONFIG_NETLINK is not set # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y # # SCSI low-level drivers # # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_NCR53C7xx is not set # CONFIG_SCSI_NCR53C8XX is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_GDTH is not set # # Network device support # CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set # CONFIG_DLCI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set CONFIG_NET_RADIO=y # CONFIG_BAYCOM is not set # CONFIG_SOUNDMODEM is not set # CONFIG_MKISS is not set CONFIG_BPQETHER=y # CONFIG_PT is not set # CONFIG_PI is not set # CONFIG_SCC is not set # CONFIG_STRIP is not set # CONFIG_WAVELAN is not set CONFIG_NET_ETHERNET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_PCI is not set # CONFIG_NET_ISA is not set # CONFIG_NET_EISA is not set # CONFIG_NET_POCKET is not set CONFIG_TR=y CONFIG_IBMTR=m # CONFIG_FDDI is not set # CONFIG_ARCNET is not set # CONFIG_SHAPER is not set # CONFIG_RCPCI is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # CD-ROM drivers (not for SCSI or IDE/ATAPI drives) # # CONFIG_CD_NO_IDESCSI is not set # # Filesystems # CONFIG_QUOTA=y # CONFIG_MINIX_FS is not set # CONFIG_EXT_FS is not set CONFIG_EXT2_FS=y # CONFIG_XIA_FS is not set CONFIG_NLS=y CONFIG_ISO9660_FS=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_UMSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_KOI8_R is not set CONFIG_PROC_FS=y CONFIG_NFS_FS=y # CONFIG_ROOT_NFS is not set # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set CONFIG_HPFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_UFS_FS is not set # # Character devices # CONFIG_SERIAL=y # CONFIG_SERIAL_PCI is not set # CONFIG_DIGI is not set # CONFIG_CYCLADES is not set # CONFIG_ISI is not set # CONFIG_STALDRV is not set # CONFIG_RISCOM8 is not set # CONFIG_PRINTER is not set # CONFIG_SPECIALIX is not set CONFIG_MOUSE=y # CONFIG_ATIXL_BUSMOUSE is not set # CONFIG_BUSMOUSE is not set # CONFIG_MS_BUSMOUSE is not set CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_UMISC is not set CONFIG_QIC02_TAPE=y CONFIG_QIC02_DYNCONF=y # # Setting runtime QIC-02 configuration is done with qic02conf # # # from the tpqic02-support package. It is available at # # # ftp://titus.cfw.com/pub/Linux/util/ # # CONFIG_FTAPE is not set # CONFIG_APM is not set # CONFIG_WATCHDOG is not set CONFIG_RTC=y # CONFIG_VIDEO_DEV is not set # # Sound # # CONFIG_SOUND is not set # # Kernel hacking # # CONFIG_PROFILE is not set
