David, I don't see a problem here. I don't want to mix water with diesel I just want to introduce a little water vapour into the combustion process. I can't see any difference between petrol and diesel powered engines here except that the diesel does not have the manifold vacuum to create the fog. This is where I need a pressure pump to pump a small amount of water into a misting nozzle placed at the air intake. Alternatively I could use an air pump to blow air through the water container (via the air stone) and feed the moisture laiden air to the inlet manifold. Have I been missing something here, am I on the right track?
Andrew (OZ) --- In [EMAIL PROTECTED], "David Reid" <[EMAIL PROTECTED]> wrote: > Andrew, > I dont think you can install a fogger (mister) in a diesel > vehicle. I think the only way you can mix water and diesel is with the use > of additives and a reasonably sophisticated mixer. Left to their own devices > they generally separate out. The inclusion of water generally means better > combustion and the emission of less contaminants, and this is why it is > normally done, and there is a lot of research and development going into it > around the world at present. What is the purpose of the pressure pump in > this case? > B.r., David > > ----- Original Message ----- > From: <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, May 02, 2001 1:04 PM > Subject: [biofuel] Re: Foggers > > > > I am working on installing a mister in my diesel Mercedes running on > > straight fat. Just looking for a suitable little pressure pump. > > > > Andrew (OZ) Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html To unsubscribe, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/