Indeed true as fluid has to be pumped up whereas air only has to be pushed down. This brings up another point. Often wonder when using this bubblewashing process in an area with high humidity how much moisture is added to the mix from the latent moisture in the air and what its affect upon the mix and the final outcome is? When you consider bubblewashing can last a considerable time and the amount of air pumped through the mix can be a considerable volume it must be possible under some conditions to add a reasonable amount of water to the mix. Under normal conditions with low r.h the amount of moisture added is probably pretty well much the same as that evaporated at the surface as the air breaks the surface I imagine. Anyone with any comments or vast experience on this? B.r., David
----- Original Message ----- From: Biofuels <[EMAIL PROTECTED]> To: <biofuel@yahoogroups.com> Sent: Monday, June 04, 2001 6:45 AM Subject: Re: [biofuel] Bio washing > Uses more energy to pump water than it does to pump air.# > Number of droplets formed, unless under high pressure, does not equal number > of bubbles formed therefore will not be as effective. > I counted them. Biofuel at Journey to Forever: http://journeytoforever.org/biofuel.html Please do NOT send "unsubscribe" messages to the list address. To unsubscribe, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
